A remodeled home is not necessarily a repaired home. Fresh cabinets, paint and flooring show what was changed on the surface; they cannot by themselves prove that older systems were upgraded or hidden water problems were solved. A thoughtful buyer should separate cosmetic improvements from structural, electrical and moisture-related work.
Before purchasing a recently renovated property, ask for a detailed scope, permits where applicable, invoices, warranty information and photographs taken before walls or floors were closed. Use the following seven areas as a conversation guide, not a verdict on the seller or contractor.

Quick answer: Treat new finishes as presentation, not proof of the condition of concealed systems. Request documentation, inspect what is accessible, and seek specialist follow-up where evidence warrants it.
Luxury vinyl, laminate and new carpet can dramatically change a room's appearance. But new material may have been placed over uneven, previously wet or poorly prepared subfloors. Softness underfoot, transitions that feel unexpectedly raised, staining near exterior doors and a persistent musty smell should trigger questions about what lies beneath.
Ask for: The flooring contractor's scope, evidence of moisture remediation where water damage was reported and any subfloor repairs. A visual inspection may document flexing, moisture clues and unevenness, but cannot confirm hidden conditions beneath intact flooring. More invasive evaluation may require the owner's authorization and a qualified contractor.
A spotless ceiling can be encouraging, but fresh finishes can also make historic stains harder to identify. Previously wet areas around windows, showers, chimneys and roof penetrations may remain vulnerable when the source of water was not fixed before painting or drywall replacement.
Ask for: Evidence of leak-source repairs, not just receipts for painting. Note patch outlines, uneven texture, swollen trim or water marks in adjacent accessible areas. The EPA advises that successful mold prevention depends on correcting moisture problems. An inspector may recommend a closer moisture evaluation when observable clues justify it; learn about thermal imaging and moisture meters as complementary tools rather than guarantees.
New pendant lighting, smart switches and modern outlet covers are easy to notice. Behind them, the relevant questions are whether circuits were modified safely and whether the panel, protective devices and connections are appropriate for the work performed. Cosmetic upgrades alone cannot establish these facts.
Ask for: Electrician invoices, scope of changes, permits and required inspections, if applicable locally. If the renovation added kitchens, bathrooms or converted living space, find out which circuits were installed. A standard inspector can review readily accessible features but is not a substitute for a licensed electrician investigating suspicious wiring. See our electrical panel inspection guide for useful questions.
New tile and fixtures make bathrooms appealing, yet water-resisting layers behind shower walls and under tiled floors are usually concealed. Missing or poorly integrated waterproofing around a shower, tub surround or curbless threshold may not become obvious until moisture reaches adjacent walls or ceilings.
Ask for: The waterproofing system used, installation records, photos taken before tiling and details of any leak testing. Look for loose tiles, deteriorated grout or caulk, staining on nearby ceilings and soft flooring. These observations may be clues but cannot prove the concealed waterproofing assembly is defective or sound. Escalate specific concerns to an appropriate contractor before closing.
A replaced faucet or toilet does not necessarily mean supply piping, shutoff valves or drain lines were replaced. A remodel may connect modern fixtures to older plumbing, leaving recurring pressure complaints, hidden leaks or underground pipe defects unresolved.
Ask for: Plumbing permits where required, invoices describing exactly which lines were changed and documentation of past backups. Check accessible cabinets for staining and corrosion. For properties with older drains, repeated clogs or mature trees, discuss whether a sewer-scope inspection is justified; a general home inspection typically cannot evaluate the entire buried sewer lateral.
Adding drywall, carpet and furniture to a basement can create useful living space while hiding the wall or floor where water previously entered. Seasonal groundwater, exterior grading defects or improperly routed downspouts may reappear after heavy rain. The key issue is whether the source of moisture was addressed before finishing.
Ask for: Details of drainage work, waterproofing invoices, sump-pump records, and photographs before the renovation. Smell, staining, efflorescence and areas of swollen trim can guide further questions. EPA guidance specifically recommends solving moisture issues before converting basements into living areas. Read more about site drainage and grading when reviewing the exterior conditions.
New counters and appliances can disguise unfinished work where exhaust ducts, electrical circuits and older connections meet. A recirculating range hood behaves differently from one that exhausts outdoors, and a new appliance should not be assumed to have been installed correctly merely because it turns on.
Ask for: Appliance manuals, installation records, required electrical and plumbing permits and evidence of how exhaust is routed. Look for active leaks beneath the sink, loose mounting, nonfunctional outlets and ventilation concerns that are visible during inspection. Where a renovation occurred in a pre-1978 home, also ask about lead-safe work practices; EPA's Renovation, Repair and Painting rule covers many paid projects disturbing old painted surfaces.
Ask for a written renovation scope, itemized invoices, contractor information, applicable building permits and final approvals, product warranties, leak or insurance-claim history and photos of work before walls or floors were closed. Missing paperwork does not automatically establish a defect, but it increases uncertainty about work you cannot see.
No. A typical home inspection evaluates visible and readily accessible conditions; it is not a comprehensive code or permit inspection. Verification of permits belongs with the appropriate local authorities, and concerns about structural alterations or concealed assemblies may require the relevant specialist.
Arrange a buyer's home inspection with My City Home Inspector while your contract gives you time to request follow-ups. If moisture, drainage or electrical warning signs appear, obtain specialist input before assuming the new finishes tell the whole story. You can also review what to check before buying newly built property for a related discussion of construction-stage blind spots.
EPA: remodeling and indoor air quality; CFPB: independent home inspections; EPA: lead-safe renovation requirements.
A house can photograph beautifully and still require major work behind the finishes. The most important home-buying question is not whether every defect exists—most lived-in houses have some—but which findings could affect safety, future costs or the ability to use the property as intended.
Buyers around Chattanooga and the surrounding markets should examine the major systems, request documentation and allow time for follow-up evaluations. The Consumer Financial Protection Bureau advises scheduling an independent inspection early enough to investigate important findings before the purchase deadline.

Quick answer: Treat new finishes as presentation, not proof of the condition of concealed systems. Request documentation, inspect what is accessible, and seek specialist follow-up where evidence warrants it.
A newly painted ceiling is not proof of a leak, but a stain that returns, peeling trim, swollen baseboards or a persistent musty odor deserves attention. Moisture may come from a roof leak, plumbing connection, condensation or groundwater intrusion. Different sources require different repairs; simply repainting does not correct any of them.
What to ask: When was the area last wet, what caused it, and what work was performed? Request dated repair documentation and inspect nearby accessible surfaces for evidence of continuing moisture. The EPA emphasizes that controlling moisture—not merely cleaning visible growth—is central to preventing recurring mold problems. If concerns remain, discuss a follow-up moisture or mold inspection where appropriate.
Cracks in masonry do not all carry the same significance. A narrow, stable shrinkage crack differs from displacement accompanied by a sticking door, sloped floor or recurring water entry. Soil conditions, grading and unmanaged roof runoff can also influence foundation moisture and pressure. The costly risk is ignoring a pattern because one crack appears small.
What to ask: Have cracks changed, has the foundation been repaired, and is there an engineering report? Look at surface drainage after rainfall and ask how gutters discharge. A home inspector can document visible concerns but cannot certify concealed foundation conditions or structural adequacy. Significant movement may call for a structural engineer; start with our guide to grading and drainage around a home.
New switches, outlets and light fixtures can make an electrical system look modern without updating older circuits or correcting unprofessional alterations. The important questions concern distribution equipment, grounding, appropriate protective devices, wiring condition where accessible, and signs of overheating or unsafe modifications.
What to ask: Was a panel replacement or rewiring performed, by whom, and under which permit or inspection? Do not remove panel covers or investigate live equipment yourself. A general home inspection is not a code-compliance audit, but visible deficiencies can justify consultation with a qualified electrician. Learn what is typically considered during an electrical panel inspection.
From the curb, a roof may look sound even when flashing details at chimneys and vents are deteriorated. Interior staining can occur away from the entry point because water travels along framing. Missing shingles, exposed fasteners, patchwork repairs and soft sheathing warrant closer examination before a buyer accepts an optimistic statement about remaining service life.
What to ask: How old is the roof, what has been repaired, are warranties transferable, and is there any history of water intrusion? Your inspection should clarify visibility limitations, especially on steep or inaccessible roofs. Obtain a roofing specialist's estimate if major defects are reported rather than assuming a small patch will resolve everything.
A home can feel comfortable during a short showing while its heating or cooling system struggles under more demanding conditions. Maintenance history, age, airflow, accessible duct condition, unusual sounds and signs of poor temperature control all matter. An aging unit is not automatically defective, but its probable maintenance and replacement exposure should be part of the budget.
What to ask: When was the equipment serviced, were large components replaced, and are there recurring performance complaints? A standard inspection is a limited functional assessment rather than a guarantee of remaining years of service. See what a home inspection of HVAC systems can and cannot establish, and call an HVAC contractor for diagnostic testing if symptoms require it.
Crawl spaces are easy to forget during a showing and difficult to interpret without proper access. Standing water, condensation on ductwork, wet insulation, damaged vapor barriers and visibly deteriorated framing can signal ongoing moisture management problems. Humidity can also create conditions that favor wood-destroying organisms, though identification and treatment require separate expertise.
What to ask: Has the crawl space flooded, are there invoices for drainage or encapsulation work, and is it accessible for inspection? Never enter a confined or unsafe crawl space. Request focused follow-up if access is blocked or wood deterioration is observed; the absence of visible evidence from an inaccessible area is not proof of good condition.
A finished attic bedroom, converted garage or recently opened wall may be useful, but the work raises questions about structure, ventilation, electrical changes and approvals. A polished surface does not tell you what framing was altered or whether hidden work was examined before drywall went up.
What to ask: Request permits, final inspection records, contractor invoices and any available plans. Compare claimed living space with public records without assuming records will always be complete. If modifications involved load-bearing walls or unusual roof framing, additional specialist review may be needed. A pre-purchase inspection is one step in due diligence, not a substitute for validating renovation documentation.
A running faucet during a showing tells you little about the condition of an underground sewer lateral. Older piping, tree roots, bellies, corrosion and poorly joined repairs may not be obvious until a line backs up. Slow drains, sewer odors, recurring clogs and unusual cleanout conditions are clues, but some defects exist without any symptoms.
What to ask: Has the sewer line been scoped or repaired? Are there receipts for repeated drain cleaning? If the property is older, has mature tree growth, or has a history of backups, ask whether a sewer-scope inspection would be appropriate. Camera findings still need professional interpretation; not every small imperfection requires excavation.
A fresh-looking interior can mask poor attic insulation, missing air sealing or bath fans exhausting into the attic rather than outdoors. The result may be uneven temperatures, higher energy consumption or persistent condensation. Adding more insulation without correcting an active moisture source is not an effective first step.
What to ask: Were air sealing or ventilation improvements completed, and can the seller provide details? Ask the inspector to document visible insulation and moisture concerns, plus any spaces that could not be accessed. ENERGY STAR recommends addressing wet insulation, deteriorated rafters and improperly routed exhaust ducts before ordinary attic improvement work.
Prioritize active moisture intrusion, electrical safety concerns, structural displacement, major roof deterioration and potentially failing underground lines. Ask the inspector which conditions were directly observed, which are suspected and which require a specialist. Then request written repair estimates before negotiation deadlines. Not every defect is a deal-breaker, but expensive uncertainties deserve evidence.
No. A home inspection is generally visual and limited to accessible systems and conditions at the time of the visit. Inspectors cannot see inside sealed walls or promise that equipment will never fail. That is why the report, seller disclosures, maintenance records and targeted specialty inspections should be considered together.
Use My City Home Inspector's buyer-inspection information to plan your inspection and consider appropriate add-ons for the property. Review findings early, not on the eve of closing. For context on next steps, read how to read a home inspection report.
Consumer Financial Protection Bureau: scheduling a home inspection; EPA: mold and moisture guidance; ENERGY STAR: attic air sealing and warning signs.